Miele KFN 37682 iD Operating And Installation Instructions page 88

Installing the appliance
Preparing the appliance
 Position the appliance in front of the
housing unit.
 Fit cover strip  into position.
88
 Screw fixing bracket  using hex
screw  to the pre-drilled holes in
the appliance door. Using the pre-
drilled holes in the appliance door,
secure a second pair of fixing brack‐
ets  in the handle area of the door.
 Push the appliance two-thirds of the
way into its niche. When doing this,
make sure that the mains cable does
not get trapped.
Tip: To help you push it into position,
tie a piece of string around the plug to
"increase" the length of the connection
cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the ap‐
pliance is in the unit.