Miele KFN 37682 iD Operating And Installation Instructions page 41

High humidity in the humidity con‐
trolled compartment can cause con‐
densate to build up on the floor of
the compartment as well as beneath
the lid.
Use a cloth to remove the conden‐
sate.
Note for test institutes:
When measuring energy consumption
in accordance with the standard, the
regulator in the humidity controlled
compartment should be set to the 
setting ("humidity not increased").
Storing food in the PerfectFresh Pro zone
Regulating the humidity level in the
humidity-controlled compartment
The regulator is used to adjust the rela‐
tive humidity in the humidity controlled
compartment via the ,  and  set‐
tings.
 Push the regulator back as far as it
will go and then release it slowly.
The regulator will click into the  setting
automatically
 To select the  or  setting, push
the regulator back and release it
again to engage it in the  or  po‐
sition.
41