Miele KFN 37682 iD Operating And Installation Instructions page 57

The following parts are suitable for
cleaning in a dishwasher:
The maximum temperature of the
dishwashing programme selected
must not exceed 55 °C
Contact with natural dyes from car‐
rots, tomatoes and ketchup may dis‐
colour the plastic parts in the dish‐
washer.
This discolouration does not affect the
stability of the parts.
– the bottle holder, butter dish, egg
tray, ice cube tray
(depending on model)
– the bottle shelf and shelves in the
door (with stainless steel trim re‐
moved)
– the adjustable shelves (with the trim
removed)
Cleaning and care
 Clean the condensate channel and
drain hole frequently so that conden‐
sate can drain away unhindered. Use
a straw or similar to clear the drain if
necessary.
To do this, remove the PerfectFresh
Pro zone compartments.
Be careful not to wash out the spe‐
cial lubricant in the telescopic run‐
ners during cleaning.
 The PerfectFresh Pro zone compart‐
ments are on telescopic runners.
Clean the telescopic runners with a
damp cloth.
 Miele stainless steel conditioning
agent can be used to remove any
soiling from the stainless steel trim.
Tip: It is important to treat the stainless
steel trim with Miele stainless steel con‐
ditioning agent each time it is cleaned.
This will protect the surface and help
prevent re-soiling.
 Leave the door open to air the appli‐
ance for a short while and to prevent
odours building up.
57