Axis V5914 User Manual page 62

AXIS V5914 PTZ Network Camera
Technical Specifications
Function
0 V DC (-)
DC output
Configurable
(Input or Output)
Power Connector
2-pin terminal block for DC power input. Use a Safety Extra Low Voltage (SELV) compliant
limited power source (LPS) with either a rated output power limited to ≤100 W or a rated output
current limited to ≤5 A.
Audio Connector
3.5 mm audio connectors
(stereo)
Audio Input
Audio Output
3–pin XLR connectors
(balanced)
1
Pin
Function Ground
Pin Notes
1
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3–4
Digital input – Connect to pin 1 to activate, or leave floating
(unconnected) to deactivate.
Digital output – Connected to pin 1 when activated, floating
(unconnected) when deactivated. If used with an inductive
load, e.g. a relay, a diode must be connected in parallel with
the load, for protection against voltage transients.
1 Tip
Microphone/Line in (left)
Line out (left)
2 1
3
2
Balanced Microphone Hot (+) In
3 2 1
2 Ring
Microphone/Line in (right)
Line out (right)
3
Balanced Microphone Cold (-) In
62
Specifications
0 V DC
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC, open drain,
100 mA
3 Sleeve
Ground
Ground