Master Bilt DC-10D Specification Sheet

DC-2S
FEATURES FEATURES
NEW
STANDARD TEXTURED EXTERIOR
Standard Black also
white available
CONSTRUCTION
• Seamless stainless steel top
• 24 gauge painted textured
galvanized steel cabinet
• Galvanized steel interior
• Equipped with leveling legs to
correct for unlevel flooring
situations
• Floor drain with garden hose
fitting
• Galvanized steel inner liner with
cold wall evaporator
DC-8D
C-UL listing for
all models
except
DC-12D.
• Anti-condensate heaters under
stainless top cap
• 2 / " foamed-in-place "zero
1
4
ODP" urethane insulation
LIDS
• Stainless steel
• Hinged with handles
• Gasket
REFRIGERATION
• Refrigerant:
DC-12D ..........................R-404A
All other models ............ R-134a
• Self-contained, factory tested
refrigeration system
• Force draft hermetic condensing
unit (semi-hermetic unit on DC-
12D with wire and tube con-
denser for low maintenance)
• Minimum 4" clearance required
between cabinet back and wall
• Temperature range:
10° to -10°F (-12° to -23°C)
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
DC SERIES
Conventional
Ice Cream Storage/Dipping
Cabinets
MODELS
❑ DC-2S ❑ DC-8D
❑ DC-4S ❑ DC-10D
❑ DC-4D ❑ DC-12D
❑ DC-6D
• R-factor (insulation efficiency
rating): 19.40
WARRANTY
• Standard limited three year
extended compressor and two
year limited parts and labor
OPTIONS
❑ Add suffix "SE" for all-
stainless exterior
❑ Custom colors
❑ Lid locks
❑ Legs
❑ Casters
❑ Additional lids
❑ Load level shelves
❑ Dipper well