Specifications - Vertex Standard VX-920 Series Service Manual

Specifications

General
Frequency range:
Channel / Group:
Channel Spacing:
PLL Stepping:
Power Supply Voltage:
Current Consumption:
(Approx. @7.4 V)
Battery Life (Approx.):
Operating Temperature Range:
Frequency Stability:
Case Size (W x H x D):
Weight (Approx.):
Receiver (Measurement per TIA/EIA-603)
Circuit Type:
Sensitivity (12dB SINAD):
Adjacent Channel Selectivity:
Intermodulation:
Spurious Response Rejection:
Num & Noise:
Audio output:
Spurious Emissions:
Transmitter (Measurement per TIA/EIA-603)
RF Power Output:
Modulation Type:
Maximum Frequency Deviation: ±2.5/±4.0/±5.0 kHz
FM Hum & Noise:
Audio Distortion:
Spurious Emissions:
Specifications subject to change without notice or obligation.
2
134-174 MHz
48 CH / 3 Groups (w/o LCD version)
512 CH / 32 Groups (w/ LCD version)
12.5/15/20/25/30 kHz
1.25/2.5/5/6.25/7.5 kHz
7.4 V
30 mA (Standby w/saver)
75 mA (Standby)
200 mA (Receive)
1.7 A (Transmit)
7 hours (w/ FNB-V86LI)
12 hours (w/ FNB-V87LI)
–22 °F to +140 °F (–30 °C to +60 °C)
±2.5ppm
2.24" x 5.24" x 1.48" (57 x 133 x 37.5 mm)
13.1 oz (370g) (w/FNB-V86LI, ATV-8B, CLIP-920)
Double Conversion Super-heterodyne
0.25 µV/0.32 µV(W/N)
75/70 dB (W/N)
75/70 dB (W/N)
80 dB
48/42 dB (W/N)
700 mW @ 16 ohms 5% THD
–57 dBm
5/2.5/1/0.25 W
Direct FM (16K0F3E/11K0F3E)
45/40 dB (W/N)
Less than 3% @ 1kHz
–36 dBm @under 1 GHz
–30 dBm @above 1 GHz