3 .3 Se r ia l Com m u n ica t ion
The RS232C I nt erface signals for t he APEX 2 Series print ers are t erm inat ed on a 6 PI N RJ
t ype dat a connect or locat ed on t he side of t he print er.
Six connect ions are provided from t he Serial I nt erface t o t he host com put er.
below, list s t he Serial I nt erface signals and pin out s on t he RJ connect or. The connect or
pin locat ions are shown in Figure 11.
A m inim um of t wo pin connect ions are required for operat ion, RXD – pin 3 and Com m on –
pin 1.
Dip Swit ch # 1 and # 2 m ust be in t he < OFF> posit ion t o act ivat e t he serial com m unicat ion
int erface
Note: The communication parameters: Baud rate, Data Bit and Parity settings must match those of
the host device. Dip switch #1 must be in the OFF position.
FI GURE 1 1 : RJ D ATA CON N ECTOR
Ta ble 3 – APEX 2 Se r ia l RS2 3 2 C I n t e r fa ce sign a ls
12
Table
3,