Quick Start Guide This guide provides reference illustrations of the initial steps to quickly get your APEX 3 printer up and running. Refer to the User’s Guide for more detailed information on the operation and use of the APEX 3 printer.
Installing the Battery 1. Unlock the battery door by sliding the battery door locking tab down. Note: Ensure battery is properly seated before closing door and that the battery side that Battery has the 2 contact terminals is facing down Door Tab to make contact with the spring probes inside the battery compartment...
Installing the Paper Roll 1. Open the Paper Supply Cover by placing your fi ngers under the “T” pull lever and pulling up fi rmly on the supply cover until the lever stops moving. The cover should open to a 90° angle. Note: Do not pull too fi...
Need help?
Do you have a question about the Apex 3 and is the answer not in the manual?
Questions and answers