Toshiba e-Studio 452 Operator's Manual page 63

Continuous feed mode
1
Align all the originals. Then place them
face up and align the side guides to the
original length.
• Place the originals straight along the side guides.
• Collate the originals in the order that you want them to be cop-
ied. The top sheet of the originals will be fed first.
• This mode is also available for one-sheet originals.
• Regardless of their sizes, originals are acceptable up to 100
sheets (50 to 80 g/m
• For mixed-size originals, see
nals in one go (mixed original size)".
• Use the original stopper as required.
• To replace the original stopper, lift it slightly and push it in.
When the number of originals is too large to be set at one time, you can previously divide the originals into sev-
eral sets to copy them continuously. To do so, place the first set of the originals and press the [CONTINUE] but-
ton on the touch panel while the data of this set are being scanned. When this scanning has finished, set the next
set of the originals and press the [START] button on the control panel.
2
) or 16 mm in height.
P.87 "Copying mixed-size origi-
2
61