Toshiba e-Studio 452 Operator's Manual page 278

5.Jam Symbols (Cont.)
To release a paper misfeed in the Paper Feed Pedestal
(optional):
Open the cover of the Paper Feed Pedestal as shown on
the right, and remove any misfed paper.
3
Close the cover.
Releasing a paper misfeed on the bypass tray
1
Pull out misfed paper on the bypass tray.
9
Releasing a paper misfeed in the automatic duplexing unit
• Be careful not to let your fingers be caught between the equipment and the automatic duplexing unit.
This could injure you.
• Do not touch the metal portion of a guide plate as it could burn you.
1
Make sure that the bypass tray is
opened, and then open the automatic
duplexing unit.
276
9.BLINKING GRAPHIC SYMBOLS