Toshiba e-Studio 452 Operator's Manual page 254

6.Error Code (Cont.)
Error code
1C70
1C71
1C72
1C80
1C81
1C82
1CC0
1CC1
3A10-3A12
8
3A20-3A22
3A30
3A40
3A50-3A52
3A60-3A62
3A70
3A80-3A82
3B10-3B12
3B20-3B22
3B30-3B32
3B40-3B42
252
8.JOB STATUS
Problem
SMTP client OFF
SMTP authentication
error
POP Before SMTP
error
Internet Fax transmis-
sion failure when pro-
cessing E-mail job
received
Onramp Gateway
transmission failure
Internet Fax transmis-
sion failure when pro-
cessing Fax job
received
Job canceling
Power failure
MIME format error
E-mail process error
Partial E-mail timeout
error
Invalid partial E-mail
received
HDD full error
HDD full alert
Interrupt partial E-mail
reception
Partial E-mail disabled
E-mail format error
Context-type error
Invalid character set
E-mail decode error
Ask your administrator to enable the SMTP Client and perform
the job again.
Check if the SMTP authentication method, login name and
password are correct. If the SSL setting is enabled, check if the
setting and the port number of SSL correspond to those of the
server.
Check if the settings of POP Before SMTP and POP3 are cor-
rect.
Confirm the "Received Internet Fax Forward" settings.
Confirm the mailbox settings.
Confirm the "Received Fax Forward" setting.
Job was canceled.
Check if the power cable is connected properly and it is inserted
securely. Check if the power voltage is unstable.
Ask the sender to resend the E-mail in the MIME1.0 format.
Ask the sender to resend the E-mail.
Ask the sender to resend the E-mail, or change the Partial Wait
time setting.
Ask the sender to resend the partial E-mail in the RFC2046 for-
mat.
Ask the sender to resend the E-mail by separating it to several
E-mails. If this error occurs because the paper empty occurs
and too much waiting jobs are stored in the hard disk, add the
paper to activate other jobs.
Ask the sender to resend the E-mail by separating it to several
E-mails. If this error occurs because the paper empty occurs
and too much waiting jobs are stored in the hard disk, add the
paper to activate other jobs.
Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.
Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.
Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.
Ask the sender to resend the E-mail with attached files that are
the TIFF format.
Ask the sender to resend the E-mail in the ISO-8559-1/2 format.
Ask the sender to resend the E-mail.
What to do