Toshiba e-Studio 452 Operator's Manual page 258

6.Error Code (Cont.)
Error code
2D64
2D66
2D67
2D68
2DA8
2DC0
2DC1
Store to e-Filing
2B10
2B11
2B20
8
2B21
2B30
2B31
2B32
2B50
2B51
2B90
2BA0
2BB0
256
8.JOB STATUS
Problem
Logon to file server
failed. Check user-
name and password.
Failed to process your
job. Insufficient disk
space.
FTP service is not
available.
File sharing service is
not available.
The HDD is running
out of capacity for the
shared folder
Job canceled.
Power failure
occurred.
There was no applica-
ble job.
Job status failed.
Failed to access file
Message size
exceeded limit or maxi-
mum size
Insufficient disk space
Failed to access
e-Filing
Failed to print e-Filing
document
Failed to process
image
Failed to process print
image
Insufficient memory
Invalid box password
specified
Job canceled.
Make sure you specify correct user name and password to
logon the file server and retry the scan.
Delete the data in the local shared folder in the equipment and
retry the scan.
Ask your administrator whether the FTP service is configured
correctly.
Ask your administrator whether the SMB protocol is enabled.
Delete the unnecessary data in HDD.
Job was canceled.
Make sure that the power cable is connected properly and it is
inserted securely. Resend the job.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
You are sending too many documents at a time. Send your doc-
uments separately.
Delete unnecessary documents in e-Filing and try again.
Make sure that the specified e-Filing or folder exists. (If not, this
error would not occur.). Turn the power OFF and then back ON.
Delete the specified e-Filing or folder and reset them. Retry the
job in error. If the specified e-Filing or folder cannot be deleted,
contact your service representative.
Make sure that the specified document exists. (If not, this error
would not occur.).Turn the power OFF and then back ON.
Delete the specified document. If the specified document can-
not be deleted, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Make sure that the Function List can be printed out. Retry the
print. If the error still occurs, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Make sure that the password is correct and retry the scan, or
reset the password and retry the scan. When this error occurs
for the print of the data in the e-Filing, perform the print with the
administrator's password. If the recovery is still not completed
or in case of invalid password for the operation other than print-
ing (opening the file, etc.), contact your service representative.
Job was canceled by the user.
What to do