Toshiba e-Studio 452 Operator's Manual page 109

Number of punch holes and available paper sizes
Since the number of punch holes and the distance between the holes vary depending on the country/
region, purchase a hole punch unit that meets your requirements. (For details, consult your service techni-
cian.)
MJ-6004E
(Japan and most of Europe)
MJ-6004N
(North America)
MJ-6004F
(France)
MJ-6004S
(Sweden)
MJ-6101E
(Japan and most of Europe)
MJ-6101N
(North America)
MJ-6101F
(France)
MJ-6101S
(Sweden)
Manual staple mode (optional for MJ-1101 only)
When installing the optional Finisher (Type B) (MJ-1101), you can use only the manual stapling mode. In
that case, perform the operation on the control panel of the finisher.
1
Press the [MANUAL STAPLE] button (2).
• The shutter of the paper exit is lowered.
Number of punch holes
and hole diameter
2 holes
(6.5 mm dia.)
2/3 holes switchable
(8.0 mm dia.)
4 holes
(6.5 mm dia.; 80 mm pitch)
4 holes
(6.5 mm dia.; 70 mm and 21
mm pitch)
2 holes
(6.5 mm dia.)
2/3 holes switchable
(8.0 mm dia.)
4 holes
(6.5 mm dia.; 80 mm pitch)
4 holes
(6.5 mm dia.; 70 mm and 21
mm pitch)
1
Available paper sizes
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT, LT-R, COMP
2 holes: A4-R, LG, LT-R
3 holes: A3, A4, LD, LT
A3, A4, LD, LT
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT-R, COMP
A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT,
LT-R, COMP, A3, A4
2 holes: A4-R, LG, LT-R
3 holes: A3, A4, LD, LT
A3, A4, LD, LT
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT, LT-R, COMP
2
3
107