Table of Contents
Advertisement
Trimming the hair length with trimming combs «medium»
and «long»
The trimming combs (1b) / (1c) allow you to cut the hair to
2 different lengths («medium» = 3 mm or «long» = 8 mm).
Start with the «long» trimming comb (1c) to acquire
practice. Gently move the cruZer body against the
direction of hair growth with the comb tips pointing
forward (picture c).
•
Combishave («1+2»):
Trimming and shaving in one stroke for a close shave of
long haired sections with the trimmer (2) and shaving
system (3)
The combishave is suitable for large areas like chest and
back.
Press the « » button and extend the slider to the «1+2»
setting (picture d).
Press the on/off switch (6) to turn on the cruZer body.
The trimmer first raises all long hairs and cuts them off.
The shaving system (3) follows to smooth away any
stubble.
For best results, always make sure that both, the trimmer
and the shaving system are in contact with the skin.
When using this function, we recommend using Gillette
shaving foam or gel.
For sensitive areas, we recommend starting with the
«sensitive» attachment (1a) and then finish with the
shaving system (3).
•
Shave («2»):
For a close shave of stubbled areas with the shaving
system (3)
Pressing the « » button, extend the slider (5) as far as it
will go to setting «2» (picture e).
Place the shaving system (3) on the stretched skin and
gently move it against the direction of hair growth.
Do not apply too much pressure and always keep your
skin stretched.
Make sure the shaving system is in full contact with the
skin.
When using the shaving system, we recommend using
Gillette shaving foam or gel.
Protection sleeve / holder for the shower
The cruZer body comes with a protective cover that can also
be used as a shower holder.
When used as a protective cover, insert the cruZer body with
the trimmer facing inwards.
22
Advertisement
Table of Contents
