Line-Specific Configuration - Linksys PAP2 Installation Manual

3.2 Line-Specific Configuration

1. Click the Line1 or Line2 tab at the top of the page, and in the NAT Settings
section, change the following setting:
NAT Keep Alive Enable
2. In the Proxy and Registration section (see the screen on the following page),
change the following settings:
Proxy
Use Outbound Proxy
Use OB Proxy In Dialog
Make Call Without Reg
Ans Call Without Reg
DNS SRV Auto Prefix
3. In the Subscriber Information section (as shown in the Line1/2 Window screen on
the following page), enter a Display Name. This value can be any alphanumeric
string. Enter the following values for outbound only service:
OUTBOUND SERVICE ONLY
4. Enter the User ID (account) and Password (PIN).
IMPORTANT You must have a different account and PIN for Line 1 and Line 2.
5. Click the Use Auth ID drop-down menu, and click no.
Field
Field
byod1.net2phone.com
Service Type
Page 5
Linksys PAP2 Installation Guide
Value
no
Value
no
no
yes
yes
no
Field
Display Name (Line 1)
Display Name (Line 2)
Display Name
Value
NO_DID1
NO_DID2