Command Table - Martin DMX Controller 2518 User Manual

a p p e n d i x c
C
OMMAND TABLE
Function
Save scene
Save flash scene
Execute flash scene
Set auto-trigger
Toggle music trigger
Toggle show mode
Set show mode banks
Set show mode loops
Blackout
Standby
Clear blackout or standby
Save auto-start configuration
Clear auto-start configuration
Toggle tandem mode
Create MIDI-callable scene
Create MIDI trigger
Delete MIDI function
Lock/unlock memory
Delete all scenes
Delete all MIDI functions
Press [Store]. Press scene no.
Press [Store]. Press [Midi].
Press [Midi].
Press [Auto]. Wait. Press [Auto].
Press [Music].
Press-and-hold [Up] + [Down].
Press [Up] or [Down].
Press a scene button from 1 to 6.
Press [Blackout].
Press-and-hold [Blackout].
Press [Blackout].
Press-and-hold channel master.
Toggle tandem mode on/off.
Put both controllers on standby.
Press [Blackout] on bottom controller.
Press [Blackout] on top controller.
Quickly press-and-hold top 3 channel buttons.
Select scene.
Press-and-hold [Midi].
Press [Store].
Generate MIDI code.
Press-and-hold [Midi].
Press [Auto].
Generate MIDI code.
Press-and-hold [Midi].
Press [Music].
Generate MIDI code.
Put (top) controller in standby.
Press [Blackout].
Quickly press-and-hold fourth + sixth channel buttons until
"LO" (lock) or "OF" (off) is displayed.
Put controller in standby.
Press [Blackout].
Quickly press-and-hold [Store] + [Up]
Put controller in standby.
Press [Blackout].
Quickly press-and-hold [Store] + [Down]
Table 7: Command summary
To execute:
25