Epson TM-TM88V-i Technical Reference Manual page 62

Changing Device ID of This Product
To change the device ID of this product, select "local_printer" from "Model", and enter the device ID
to be applied in "Device ID".
This section briefly explains the setup procedure.
1. Start EPSON TMNet WebConfig
Access the address bar of the Web browser on the PC for setting to start EPSON TMNet WebConfig.
http://"TM-i's IP address"/webconfig/
For detail, see "Starting EPSON TMNet WebConfig" on page
2. Change the device ID
From [Printer] in the [Web Service Settings] menu, change the device ID of this product.
Select [local_printer] from "Model" and enter the device ID to be applied in [Device ID].
After setting, click [Add] at the bottom of the screen. Then the settings are written to the product. If
[Add] is not clicked, the settings are not applied.
For detail, see "Web Service Settings - Device Admin - Printer" on page
3. Check the device ID
Update the browser and confirm that the device ID has been changed.
62
77.
85.