Handling
This chapter describes basic handling of the product.
Installing and Replacing Roll Paper
Do not open the roll paper cover during printing.
Do not touch the manual cutter with your hands when installing or replacing the
WARNING
Use roll paper that meets the product specification. For details about paper specification,
Paper must not be pasted to the roll paper core.
1
Press the cover open lever to open the roll paper cover.
When the roll paper cover cannot be opened, see
121.
2
Remove the used roll paper core, if any.
The product may be damaged.
roll paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
see
"Paper Specifications" on page
132.
"Removing Jammed Paper" on page
Chapter 4
Handling
119
4