Disassembly And Assembly Instructions - Sanyo PID-42NE1 Service Manual

Disassembly and Assembly instructions

1. Flowchart for disassembly
The following flowchart shows which parts should be removed in order to remove the replacement parts.
When disassembling, if the flowchart is followed, the procedure for the replacement parts can be performed more efficiently.
Preparations
1. Turn off the power switch and unplug the AC cord from the AC
outlet.
2. If there are connections to other devices, unplug them.
3. To avoid damaging the LCD panel, lay out a soft cloth
or towel and lay down the unit so the front side is facing down.
6
Main board,
Jack board
12
Speaker
18
Cabinet back
14
5
Rear cover
7
Power board
9,10,11
Cabinet back
(remove)
13
Key SW board
(replace)
8
AC cord bracket
4
14
Connector
15
LCD panel
16
RC+LED board
17
Cabinet front
(replace)
Pedestal
(option)
board