Adjustment Method - Sanyo PID-42NE1 Service Manual

Service Mode
Service Mode Function (2)
ADC Calibration Adjustment
An adjustment is performed when the LCD panel is replaced.

Adjustment Method

1) Display the "Service mode" menu.
2) Press the buttons " / " on the remote control and select "Source."
3) Press the buttons "
4) Press the buttons " / " on the remote control and select "Properties."
5) Press the buttons "
"ADC Calibration."
6) Press the buttons " / " on the remote control and select "Data."
7) By pressing the buttons "
the auto adjustment starts.
Once the ADC Calibration adjustment starts, the item display
for the "Data" item changes from "<<< >>>" to "ADC Calibration,"
and once the ADC Calibration adjustment is terminated,
it returns to the "<<< >>>" display.
The elapsed time the LCD panel is used is displayed.
Start can be performed with the auto display mode on the LCD panel.
12
" on the remote control and select "All."
" on the remote control and select
" on the remote control,
"Service Mode" menu
ADC Calibration Display
Before ADC Calibration
During ADC Calibration