Restoring The Factory Default Settings - Diamond View DV154 Manual

lines or a uniform level of noise will appear across the image once the
clock adjustment is correct. Close the clock submenu by pressing Exit.
6. Select Horizontal Position and press Enter.
7. Adjust the horizontal position so that the image is centred. Its width
should be the same as the visible width of the screen. Press Exit.
8. If some noise or distortion is still visible in the centre section of the test
pattern, select Phase and press Enter.
9. Adjust the Phase of the monitor's sampling clock to optimise the
displayed image. The alternating black and white lines should be
clearly visible. Press Exit.
10. Press Exit twice to close the OSD menu and save your changes.
If you are still not satisfied with the result, try repeating the procedure using
a graphics signal that has a different refresh rate.
Please Note:
You must use one of the factory modes. If the Auto button is not working,
or the NON PRESET MODE message is shown on the OSD you are not
using one of the supported modes. If you are having difficulties generating
a supported mode, ask your computer dealer or the distributor or
manufacturer of your graphics card for assistance.
The procedures described in this chapter should be performed for every
resolution and type of graphics signal that you wish to use. For example, if
a particular application requires a resolution of 800 x 600 pixels, but all
other applications use the monitor's native resolution, you will need to
display the test pattern and make adjustments twice.
The monitor will remember your settings and use them whenever you turn
the monitor on. Note that you may need to re-adjust the monitor if it is
connected to a different computer or if the computer's graphics adaptor is
replaced.

Restoring the Factory Default Settings

Return to the factory settings for any display mode by pressing Enter to
open the OSD, selecting Information and then press the Enter button to
restore the default settings. The Recall function only affects the graphics
mode that is currently displayed.
14