Windows Xp - Diamond View DV154 Manual

8. In the next window, click Have Disk. The Install From Disk dialogue
box will open. The default drive is the floppy disk drive, A:\. Click OK.
9. Select the DV154 LCD monitor from the list and then click Next twice.
10. The Digital Signature Not Found window might appear. Click Yes and
then click Finish to complete the driver installation.

Windows XP

Windows will load its default Plug & Play Monitor driver the first time that
you start the computer with the DV154 monitor connected. This default
driver will operate correctly. Be sure to read chapters 7 and 8 for
instructions on setting your monitor for optimal performance.
If you wish to install the Diamond View DV154 monitor driver and ICC
colour profile:
1. Right-click on the Windows desktop and select Properties, or open the
Control Panel and double-click Display.
2. From the Display Properties dialogue box, select the Settings tab.
Click the Advanced.... button at the bottom, right corner.
3. Select Monitor then click Properties.
4. Select the Driver tab and click Update Driver.
5. Insert the Diamond View LCD Monitor Utilities diskette into your floppy
disk drive.
6. Select Install the software automatically (recommended) and click
Next.
7. Click Continue and then Finish.
NOTE: A hardware installation dialogue box may appear informing you that
the monitor drivers are not Logo tested. If it does, click on Continue
Anyway and then click Finish to complete the driver installation.
8