Table of Contents
Advertisement
Restoring the Factory Default Settings
Return to the factory settings for any display mode by pressing Enter to open the
OSD, selecting Miscellaneous and then selecting Recall. The Recall function
only affects the graphics mode that is currently displayed.
On Screen Display Functions
The On Screen Display (OSD) provides functions that allow you to adjust the
displayed image, change the audio volume, reset the monitor and get information
about the displayed graphics signal.
The OSD has five functional groups for Luminance, Geometry, Colour,
Information, and Miscellaneous functions.
Luminance
Geometry
Colour
Information
Miscellaneous
Brightness and Contrast
Horizontal and Vertical Position.
Pixel Clock – Adjusts the sampling frequency for the
Analogue (VGA) to Digital signal conversion.
Phase – Adjusts the phase of the pixel clock to
eliminate sampling noise.
Adjust the Red, Green and Blue colour levels.
Information – Shows the Horizontal and Vertical
frequencies of the current graphics signal.
Recall – Resets the display to factory defaults.
OSD Setting – Change the OSD position.
Language – Select from 8 OSD languages.
OSD Time – Sets the time limit (in sec) the OSD will be
displayed on the screen.
Volume – Sets the audio volume for the speakers.
17
Advertisement
Table of Contents
