Table of Contents
Advertisement
12/06/22 14:13:46 31KYKA00_077
Engine Oil
8.
Remove the old sealing washer ( ) and
install a new sealing washer on the drain bolt.
9.
Install the oil drain bolt and tighten to the
specified torque:
18 lbf·ft (24 N·m , 2.4 kgf·m)
10.
Pour the recommended oil into the crankcase,
approximately:
1.1 US qt (1.0 )
11.
Install the oil fill cap/dipstick securely.
12.
Start the engine. Let it idle 3-5 minutes, then
turn it off.
68
Servicing Your Honda
2
13.
With the motorcycle held upright on level
ground, check the oil level.
If needed, add oil (page
the upper level mark. (Do not overfill.)
14.
Check for oil leaks.
66
) until it reaches
Hide quick links:
Advertisement
Chapters
Table of Contents
