Aztech WL556E Connecting page 5

F r e q u e n t l y A s k e d Q u e s t i o n v 1 . 0
11. Your modem's wireless configuration will be copied automatically by the WL556E as shown on
the illustration below but you still need to key-in the Encryption Key or "Wireless Key" to
complete the configuration. Ensure that the Enhanced Compatibility is CHECKED.
12. Once all the information is filled up, simply click the Apply button to commit the settings.
13. After the changes are saved, you need to close your web browser and turn the device OFF. At
this point you may plug the WL556E to a location where it can still receive sufficient signal
from your Wireless Modem to ensure that the WL556E can repeat the wireless signal
effectively. If the WL556E is too far from the Wireless Modem, it may cause packet drops or
unreliable wireless connection.
14. Allow 2 minutes after turning ON the WL556E to associate with your Wireless modem. You may
now start to connect your wireless devices via the WL556E using the Network Name and
encryption key of your Wireless Modem.
A Z T E C H T E C H N O L O G I E S P T E L T D
Page 5 of 5