Aztech WL580E Easy Start Manual

A
Package Contents
The following items are included in your WL580E package.
Please contact your Dealer if any of the following items
below are missing from your package.
WL580E Repeater
Easy Start Guide
WL580E |
Dual Band 300Mbps
Wireless-N Repeater
B
Device Overview
SMART LED
Indicator
5.0GHz LED
2.4GHz LED
Ethernet
Resource CD
Port
2.4GHz / 5.0GHz LED Behaviors
OFF
No wireless device is connected.
Easy Start Ethernet Cable Blinking
Wireless devices are currently connected and is actively
transmitting/ receiving data.
Guide (RJ45)
Connecting the WL580E Repeater to
C
the Wireless Network
WPS Button
Kindly follow any of the setup options provided in setting
up your device.
NOTE: Before proceeding, kindly turn OFF/disable
!
any wireless adapter in your computer.
Power LED
A. Wi-Fi Protected Setup (WPS)
2
Press for 5
Reset
seconds
1
Plug in the WL580E Repeater to a power outlet.
1.
2. Press the WPS button of your WL580E for five (5)
seconds.
3. Press the WPS button of your router for two (2)
seconds.
4. Launch a Web browser (e.g. Internet Explorer, Google
4. Reposition ypour WL580E for optimal signal quality
and range extension Chrome) from your computer. You will be redirected
to the WL580E Repeater's Web User Interface. If in
B. Web Browser Setup
any case it doesn't, type http://10.0.10.254 in the
address bar and then press Enter.
2
1
3
Choose a Wireless SSID (Wireless Network Name)
5.
1. Plug in the WL580E Repeater to a power outlet. from the list and click
2. Switch on the power outlet (if applicable). 6. Input the Wireless Password of the chosen Wireless
SSID and click the Apply button.
3. Connect one end of the Ethernet cable to the WL580E
Repeater and the other end to the Ethernet port of 7. Reposition your WL580E for optimal signal quality
your computer. and range extension.
to connect.