Aztech WL556E Connecting page 2

F r e q u e n t l y A s k e d Q u e s t i o n v 1 . 0
2. Now that you have written down the Network Name, Wireless Channel, Encryption Type, and
Encryption Key, you are ready to setup the WL556E.
3. Plug in the WL556E to a power outlet.
a. Connect a PC to the wireless modem.
b. Launch your web browser. Type 192.168.1.254 in the address bar.
Press Enter.
c.
Click Wireless under Top Networking Features. Take note of the
Network Name of your Wireless Modem.
d. Change Wireless Channel Mode to fixed and select a channel from
the Wireless Channel Value drop down list.
e. Take note of the NEW Wireless Channel, Security Mode, and
Encryption Key of your Wireless Modem. Refer to drawing below for
default wireless encryption key.
f. Click Save button.
g. After the new Wireless Settings are saved, proceed to step 2.
1.2
A Z T E C H T E C H N O L O G I E S P T E L T D
Page 2 of 5