Aztech WL580E Easy Start Manual

A
Package Contents
The following items are included in your WL580E package.
Please contact your Dealer if any of the following items
below are missing from your package.
WL580E Repeater
Easy Start Guide
WL580E |
Dual Band 300Mbps
Wireless-N Repeater
B
Device Overview
SMART LED
Indicator
5.0GHz LED
2.4GHz LED
Resource CD
Ethernet
Port
2.4GHz/5.0GHz LED Behaviors
OFF No wireless device is connected.
Easy Start Ethernet Cable
Blinking
Wireless devices are currently connected and is actively
Guide (RJ45)
transmitting/ receiving data.
C
Hardware Setup
WPS Button
Kindly follow the instructions below in setting up your
device. You may refer to the diagram provided for additional
reference.
NOTE: Before proceeding, kindly turn OFF/disable
!
Power LED
any wireless adapter in your computer.
2
Reset
1
3
1. Plug in the WL580E Repeater to the power outlet.
2. Switch on the power outlet.
3. Connect one end of the Ethernet cable to the WL580E Through the LED indicator, you may easily identify the
Repeater and the other end to the Ethernet port of your areas in your house where the wireless reception from
computer. your main router is weak or has no wireless signal.
You may then place the WL580E Repeater between the
Knowing more about your WL580E's
D
wireless router and the location of the weak wireless
SMART LED Indicator
signal.
The WL580E's SMART LED indicator allows you to
determine the strength of the received signal from
It is ideal for the WL580E Repeater to be placed in a
your router as seen below:
location, where it can receive good wireless signal
from the wireless router. This is to ensure that a signal
of good quality would be extended to other wireless
devices.