Lubrication And Oil Systems - Volvo Penta TAD940GE Workshop Manual

Group 20
Lubrication oil systems
TAD940-941GE, TAD940-943VE
Oil grade
VDS-3
VDS-2 and ACEA E7
VDS-2 and ACEA E5
VDS-2 and Global DHD-1
VDS-2 and API CI-4
VDS-2 and API CH-4
VDS and ACEA E3 2)
ACEA: E7, E5, E4
API: CI-4, CH-4, CG-4
TAD950-952VE
Oil grade
VDS-3
VDS-2 and ACEA E7
VDS-2 and ACEA E5
VDS-2 and Global DHD-1
VDS-2 and API CI-4
VDS-2 and API CH-4
VDS and ACEA E3 2)
ACEA: E7, E5, E4
API: CI-4, CH-4, CG-4
1) If sulfur content is > 1.0 % by weight, use oil with TBN > 15.
2) Lubrication oil must comply with both requirements. Note. API: CG-4 or CH-4 can be approved in markets outside Europe (instead of
ACEA A3).
NOTE! Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality
requirements above.
NOTE! Oil filter must be changed with every oil change.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d'Automobiles
API = American Petroleum Institute
TBN = Total Base Number
600 hours / 12 month
2)
2)
2)
2)
2)
400 hours / 12 month
200 hours / 12 month
500 hours / 12 month
2) 250 hours / 12 month
2)
2)
2)
2)
125 hours / 12 month
Sulfur content in fuel, by weight
< 0.5 % 0.5 – 1.0 %
Oil change interval: Reached first in operation
300 hours / 12 month
200 hours / 12 month
100 hours / 12 month
Sulfur content in fuel, by weight
< 0.3 % 0.3 – 0.5 %
Oil change interval: Reached first in operation
250 hours / 12 month
125 hours / 12 month
75 hours / 12 month
Technical data
1)
> 1.0 %
150 hours / 12 month
100 hours / 12 month
50 hours / 12 month
> 0.5 % 1)
125 hours / 12 month
75 hours / 12 month
50 hours / 12 month
19