Maintenance – Non Keypad Model: Disassembling and Reassembling the Radio
c.
Slide the rear chassis downwards, and away from the front housing. Be careful not to
damage the Flexible Cable (34) and speaker wire underneath. (Refer Figure 7-5).
Note: The speaker wire and flexible cable connector connecting the Front Housing Assembly (1)
and the Chassis (23) prevent the two units from being completely separated
d.
Remove the speaker wire connector connecting the main circuit board and the internal
speaker on the front housing with the tweezers. (Refer Figure 7-6)
e.
Lay the front housing down. Rotate the chassis sideways from the Front Housing
Assembly (1) and lay it down.
Speaker Wire
Figure 7-5. Speaker Wire and Flexible Cable Connection
Figure 7-6. Speaker Wire Removal
Flexible Cable
Speaker Connector
7-9