Motorola CP185 Basic Service Manual page 62

5-22 Radio Programming and Tuning: Front Panel Feature and Button Configuration Mode (Keypad Models Only)
Table 5-7. Front Panel Programming Mode Parameters: MDC1200 & QCII Models (Continued)
1st Level
Main Menu
Sub-Menu
PROG BTN SIDE 1S
(Programmable (Side Button 1
Button) – Short Press
SIDE 1L
(Side Button 1
– Long Press)
SIDE 2S
(Side Button 2
– Short Press)
SIDE 2L
(Side Button 2
– Long Press)
FRONT 1S
(Front Button 1
– Short Press)
FRONT 1L
(Front Button 1
– Long Press)
2nd Level
Setting
Sub-Menu
UNASSIGN (Unassigned)
BCKLIGHT (Backlight)
CH ALIAS (Channel Alias)
PTT ID (PTT ID Enable)
TPL/DPL (TPL/DPL Enable)
POWER (Power Level)
SCAN
SQUELCH (Squelch Level)
TALKARND (Talkaround)
MONITOR
PHONE (Phone Mode)
SCM CODE (Scrambling
Code Select)
VOX (Voice Operated
Transmit)
RV BURST (Reverse Burst)
SEL CALL (Selective Call)
CL ALERT (Call Alert)
UNASSIGN (Unassigned)
BCKLIGHT (Backlight)
CH ALIAS (Channel Alias)
KEY LOCK (Keypad Lock)
NUIS DEL (Nuisance
Channel Delete)
PTT ID (PTT ID Enable)
TPL/DPL (TPL/DPL Enable)
POWER (Power Level)
SCAN
SQUELCH (Squelch Level)
TALKARND (Talkaround)
STKY MONITOR (Sticky
Monitor)
PHONE (Phone Mode)
SCRAMBLE (Scrambling
Enable)
SCM CODE (Scrambling
Code Select)
VOX (Voice Operated
Transmit)
RV BURST (Reverse Burst)
SEL CALL (Selective Call)
CL ALERT (Call Alert)
VOL SET (Volume Set)
- same as above -
- same as above -
- same as above -
- same as above -
Remarks
Program Side Button 1 – Short Press.
Program Side Button 1 – Long Press.
Program Side Button 2 – Short Press.
Program Side Button 2 – Long Press.
Program Front Button 1 – Short Press.
Program Front Button 1 – Long Press.