TP-Link T3700G-28TQ Cli Reference Manual page 27

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
5. Configure the port selected in the step above as shown in Figure 1-4. Configure Bits per
second as 38400, Data bits as 8, Parity as None, Stop bits as 1, Flow control as None,
and then click OK.
6. The DOS prompt "T3700G-28TQ>" will appear after pressing the Enter button as shown in
Figure 1-5. It indicates that you can use the CLI now.
Figure 1-4 Port Settings
Figure 1-5 Log in the Switch
7