Olympus E-M10 Mark II Instruction Manual page 66

Peaking
AF Stop
j/Y
2
#
HDR
BKT
Multi Function
GLock (Touch panel
lock)
Electronic Zoom
V Level Disp
S-OVF (Optical
viewfi nder simulation)
* Multi function: b (Highlight&Shadow Control), c (Color Creator), e (ISO sensitivity/
White balance), f (White balance/ ISO sensitivity), a (Magnify), d (Image Aspect),
n
(S-OVF)
 Using multi function options (Multi Function)
The button assigned the [Multi Function] option using [Button Function] can be used for
multiple functions. At default settings, [Multi Function] is assigned to the Fn2 button.
Choosing a function
1
Press and hold the button to which the multi-function
has been assigned and rotate the front dial or rear
dial.
• The menus are displayed.
2
Keep rotating the dial to choose a function.
• Release the button when the desired function is
selected.
66 EN
Each press of the button switches the monitor between
display/non-display. When Peaking is displayed, histogram
and highlight/shadow display are not available.
When using Peaking, you can change colors and emphasis by
pressing the INFO button.
Stops autofocus.
Choose a sequential shooting or self timer option.
Choose a fl ash mode.
Switches to HDR shooting with the saved settings.
Turns on BKT shooting using stored settings.
To recall the selected multi function during viewfi nder
photography, press the button to which [Multi Function] has
been assigned.* g "Using multi function options (Multi
Function)" (P. 66)
Press and hold the button to enable and disable touch panel
operation.
When using a lens with a power zoom function, after pressing
the button, use the arrow pad for zooming operations.To use
power zoom, you will fi rst have to assign [Direct Function] for
[ n Function].
Press the button to display the level gauge and press it again
to turn off the level gauge. The level gauge is available when
[Style 1] or [Style 2] is set in [Built-in EVF Style].
Press the button for a viewfi nder display similar to an optical
n
viewfi nder. will be displayed in the viewfi nder. Press again
to end [S-OVF].
Highlight&Shadow Control
P