Olympus E-M10 Mark II Instruction Manual page 27

Hide thumbs Also See for E-M10 Mark II:
Table of Contents

Advertisement

• [3D Photo] is subject to the following limitations.
[3D Photo] can be used only with a 3D lens.
The camera monitor cannot be used to playback images in 3D. Use a device that
supports 3D display.
Focus is locked. In addition, fl ash and self-timer also cannot be used.
Image size is fi xed at 1824 × 1024.
RAW photography is not available.
Frame coverage is not 100%.
• In [Panning], camera movement is detected and the optimal shutter speed is controlled
when moving the camera to track a moving subject. It is convenient for shooting moving
subjects as if the background is fl owing.
In [Panning], J is displayed during panning detection, and I is displayed when
nothing is detected.
When using a lens with an image stabilizer switch in [Panning], turn the image stabilizer
switch off.
Suffi cient panning effects may not be obtained in bright conditions. Use a commercially
available ND fi lter to obtain effects more easily.
Taking panoramas
If you have installed the supplied computer software, you can use it to join pictures together
to form a panorama. g "Connecting the camera to a computer" (P. 122)
Select [Panorama] in SCN and press Q.
1
Use FGHI to choose a pan direction.
2
3
Take a picture, using the guides to frame the shot.
• Focus, exposure, and other settings are fi xed at the
values for the fi rst shot.
4
Take the remaining images, framing each shot so that the guides overlap with
the previous picture.
250
250 F5.6
M
• A panorama may include up to 10 images. A warning indicator (g) is displayed after
the tenth shot.
After taking the last shot, press Q to end the series.
5
Cautions
• During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$
Notes
• Pressing Q before shooting the fi rst frame returns to the scene mode selection menu.
Pressing Q in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.
38
[ 2 ]
250 F5.6
250
M
[ 3 ]
Exit
2
38
Exit
EN
27

Advertisement

Table of Contents
loading

Table of Contents