Using The Tv Remote Control - Olympus E-M10 Mark II Instruction Manual

1
Connect the TV and camera and switch the input source of the TV.
• When an HDMI cable is connected, images are displayed on both the television and
the camera monitor. Information display is showed on the television screen alone. To
hide the information in the shooting display, press and hold the INFO button.
• The camera monitor turns off when an AV cable is connected.
• Press the q button when connecting via an AV cable.
Cautions
• For details on changing the input source of the TV, refer to the TV's instruction manual.
• Depending on the TV's settings, the displayed images and information may become
cropped.
• If the camera is connected using both an AV and HDMI cables, it will assign priority to
HDMI.
• If the camera is connected via an HDMI cable, you will be able to choose the digital video
signal type. Choose a format that matches the input format selected with the TV.
1080p Priority is given to 1080p HDMI output.
720p Priority is given to 720p HDMI output.
480p/576p HDMI output. 576p is used when [PAL] is selected for
480p/576p
[Video Out] (P. 101).
• Do not connect the camera to other HDMI output devices. Doing so may damage the
camera.
• HDMI output is not performed while connected via USB to a computer or printer.
• When displayed information in n mode is hidden, the camera screen cannot be
displayed on the TV if the frame rate is not compatible with that TV.

Using the TV remote control

The camera can be operated by a TV remote control when connected to a TV that
supports HDMI control. g [HDMI] (P. 101)
The camera monitor turns off.
$
Notes
• You can operate the camera by following the operation guide displayed on the TV.
• During single-frame playback, you can display or hide the information display by
pressing the "Red" button, and display or hide the index display by pressing the
"Green" button.
• Some televisions may not support all features.
4
EN 111