GE Simon XTi User Manual page 6

Table 2: System communication devices
Device
Control panel
Simon XT talking touch
screen
Key fob
Telephone
Note: The default master code is 1-2-3-4 when the security system is shipped from
the factory. You should change your code after your system is installed.
2
Description
You can enter commands for your security system using the graphical
user interface on the panel. Depending on how your system is
programmed, you may need to enter an access code for certain
commands. An access code is a numeric code that allows authorization
to operate your security system.
The two-way talking touch screen is a wireless device that provides a
graphical user interface that allows you to: arm the system (doors,
windows, and motion sensors), disarm the system, activate a panic alarm
to call the central monitoring station in an emergency, check system
status, and turn system controlled lights on or off, all while providing voice
feedback. The touch screen also provides trouble beeps, entry/exit beeps
and alarm sounds (Panic, Police, or Fire).
Key fobs are handy for simple arming and disarming control functions.
They are portable and can be carried offsite in a purse or pocket.
Touchtone telephones can be used to communicate with your system
while you are offsite. Ask your installer if you have this feature.
Simon XTi User Manual