GE Simon XTi User Manual page 32

Access codes
There are three types of access codes:
Master code. The master code is your most powerful code and can be used for all
user operations including programming. The initial value of the master code is 123,
1234, 12345, or 123456, depending on the installer-programmed access code length.
User codes 1 to 8. There are eight user codes, which can be used for many user
operations, but not programming or bypassing sensors. Initially, all user codes are
blank. A user code can be deleted by pressing Delete while the code is being
changed.
Duress code. The duress code, when used in place of another user code, generates a
silent duress alarm that is reported to the central monitoring station. Initially, the
duress code is blank. The duress code can be deleted by pressing Delete while the
code is being changed.
To add/edit access codes:
1. From the Programming screen, press ACCESS CODES.
2. To add or edit an access code, press the white field next to the access code.
3. Enter the new/edited code on the numbered keypad and press SAVE.
4. Press CLOSE repeatedly to exit menus.
Security
The Security menu contains the Downloader Enable option. This option determines
whether your dealer can access the system remotely.
To program the download enable option:
1. From the Programming screen, press SECURITY.
2. Press the Security icon.
3. To turn on an option, press . To turn off an option, press .
Note: indicates the option is turned on.
4. Press CLOSE repeatedly to exit menus.
Phone numbers
Phone number 4 is the only system phone number that you can change. Therefore, it
is often used for voice reporting alarms to your phone and can be programmed for
this purpose by the installer.
Note: Certain system options must be programmed by the installer for voice
reporting alarms to work properly.
28 Simon XTi User Manual