Maintenance - Worx WG705E Safety And Operating Manual

G
H
12
I
Electric Lawn Mower
13
12
4. REAR DISChARGE (See Fig. G)
The mower provides a rear discharge function, so that
you can mower without bag collection. The debris will
be discharged from the rear chute.
5. MOWING
For cutting convenience, it may be best to start mowing
at a point close to the power supply and to work your
way away from the supply. Mow the lawn at a right
angle from the power supply and place the power cable
to side which has already been cut.
WARNING! When mowing do not allow the
motor to labor particularly in heavy conditions.
When the motor labors the speed of the motor drops
and you will hear a change in the motor sound, when
this occurs, stop mowing, release the switch lever and
raise the height of cut. Failure to do so could damage
the machine.

MAINTENANCE

Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
BLADE MAINTENANCE (See Fig. h)
WARNING! Never carry out any assembly
operations or adjustments with the power
connected to the mower. Always ensure that the power
button is in the off position and that the power plug is
disconnected from the supply.
Always handle the blade with care-sharp edges could
cause injury use gloves.
Follow these procedures to remove and replace the
blade. You will need garden gloves (not provided) and
a spanner wrench (not provided) to remove the blade.
Hold the blade (13) and unscrew the blade bolt (12)
anticlockwise using a spanner wrench. Remove blade
WG705E