Sony PDW-HD1550 Operation Manual page 103

Item number Item name
958 H DETAIL FREQUENCY (UC)
959 H/V RATIO (UC)
965 IMAGE ENHANCER (INPUT UP
CONVERTER)
Sub-item
1 ENH SETTING
2 CONVERT
3 H CROP P
4 L BOX P
5 CNV PROC
6 DETAIL
7 LIMITER
8 CRISP
9 DEPEND
10 H DETL F
11 HV RATIO
a) Not displayed when the unit is in 23.98P mode.
b) Not displayed when the unit is in 59.94P/50P mode.
Menu items in the 900s, relating to digital processing
Settings
a)
Adjust the up-converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
a)
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 (HEX) to 03 (HEX) to 07 (HEX)
Set up the operation of the up-converter image enhancer for SD input,
a) separately from the settings for playback (menu items 950 to 959).
pb: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for playback (menu
items 950 to 959). (Settings for sub-items 2 to 11 under menu item
965 become invalid.)
input: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for sub-items 2 to 11
under menu item 965 (separate settings during input of SD signals
from those during playback).
Select the up-converter mode.
EDGE CROP [CROP]: Select the edge-crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
Adjust the H-crop (horizontal crop) position for up-converter output in
edge crop mode when sub-item CONVERT is set to "CROP".
–120 to 0 to 120
Adjust the vertical location of the position where the picture is cut out for
up-converter output in letter box mode when sub-item CONVERT is set
to "L-BOX".
–120 to 0 to 120
Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE [ADAPT]: Frame or field is selected automatically.
Adjust the up-converter image enhancer. Set the sharpness of edge
enhancement.
00 to 40 to 7F (hexadecimal value)
Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 to 20 to 3F (hexadecimal value)
Adjust the up-converter image enhancer. Set the threshold amplitude at
which low amplitude signals are not emphasized.
00 to 08 to 0F (hexadecimal value)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
00 to 08 to 0F (hexadecimal value)
Adjust the up-converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 to 03 to 07 (hexadecimal value)
103
Setup Menu