Table of Contents
Advertisement
POS: moves the title around the image to a suitable position
RET: takes you back to the menu
Manual DPC: Off, Manual
White THR: 0 – 255 (in increments of 1)
Black THR: 0 – 255 (in increments of 1)
DPC Level: 0 – 255 (in increments of 1)
(Allows the user to manually remove dead pixels from the image)
Auto DPC: Off, Auto
DPC level: 0 – 50 (in increments of 1)
DPC run: cover the lens to allow the auto correction to work
OLPF (Optical Low Pass Filter)
650: only allows 650nM light to pass
850: only allows 850nM light to pass
(NOTE: whilst in the OSD menu and adjustable - these settings will have no
effect on the camera image
OSD Colour: Choose from the following colours for the OSD
(Grey, black, white, red, green, blue, magenta, cyan)
SYSTEM
Camera ID: 0 – 255 (in increments of 1)
(Whilst in the OSD menu and adjustable - these settings will have no
effect on the camera as there is no RS-485 input)
Communication: Off, On
Protocol: Pelco D
Baud rate: 2400, 4800, 9600, 19200
(Whilst in the OSD menu and adjustable - these settings will have no
effect on the camera as there is no RS-485 input)
Language: select one of the following for the OSD language
English (EN), Italian (IT), Russian (RU), Turkish (TU), Spanish (ES), German
(DE), French (FR).
15
Advertisement
Table of Contents
