Table of Contents
Advertisement
Adjusting Camera Module
TACT SWITCH OPERATION/SERVICE JACK
The tact switch allows both navigation and changes to the OSD Menu. To enter
into the OSD menu push centrally on the joystick and navigate using the up,
down, left and right actions. If there is an arrow to the right of the menu
function, this denotes that there is an accessible sub menu function.
The white 2 pin plug to the left of the tact switch is the engineer service lead
connection that allows you to set up the camera without having to remove the
main video cable (the service cable is available separately).
9
Advertisement
Table of Contents
