Table of Contents
Advertisement
Day>Night: 6 – 30 (in increments of 1)
(The higher the number, the darker it needs to be before it switches to B&W)
Night>Day: 7 – 30 (in increments of 1)
(The higher the number, the brighter it needs to be before it switches to colour)
Dwell time: 0 – 15 (in increments of 1)
(Sets the time in seconds of stable illumination before switching)
Colour: Forces the camera to colour only mode
B&W: Forces the camera to monochrome only mode
EX-CDS (auto switching between colour& monochrome on DNLED
models)
Camera switching operation is determined by the photocells – there is no
programmable delay time or switching level.
C_Sup: 0 to 100 (increments of 1)
(Adjusts the colour noise in a low light image, 0 - unsuppressed, 100 - full
suppression)
A_Sup: 0 to 100 (increments of 1)
(Adjusts the Aperture to assist with detail in low light conditions, 0 -
unsuppressed, 100 - full suppression)
FUNCTION
Mirror: Off, On
(Horizontally inverts the image)
Sharpness: 0 – 30 (in increments of 1)
(Change the sharpness of the image)
Monitor: Mode 1, Mode 2
These settings uplift the contrast and brightness levels dependant on the
monitor being used. In a majority of applications, mode 1 is better suited to a
CRT monitor and mode 2 is suited to an LCD monitor)
Gamma: 0.45, 0.60, 1.00, User
User: 0.20 – 1 (in increments of 0.05)
LSC: Off, On
On: 0 – 30 (in increments of 1)
(Adjusts luminance in peripheral areas of the of the image)
13
Advertisement
Table of Contents
