FUNAI HD-B2735 Owner's Manual page 87

E2B21BD_E2B28BD_EN.book Page 87 Monday, August 21, 2006 5:05 PM
Symptom
Titles cannot be edited or deleted.
The capacity of the disc doesn't increase
even if the recorded programme is deleted.
The disc cannot be played back on other
player even though it is finalised properly.
Dubbing cannot be executed.
Symptom
The remote control does not function.
Setup Menu Screen does not display when
[SETUP] is pressed.
Symptom
The Clock display does not appear in the
Front Panel Display.
When you forget the password for Parental
Lock.
* If you are still having trouble with this unit after checking "Troubleshooting", write down the error message and
the error description, and please call an Authorized Service Centre.
Solution
• The titles or the disc itself may be protected. Cancel the protection by
following the steps on page 69 for title protection and page 43 for disc
protection.
• The titles in the Video mode / VR mode discs cannot be edited or deleted
if they are finalised. Undo the finalisation by following the steps on page
41.
• With Video mode DVD-RW discs, the disc space will increase only when
the last title in the Original is deleted. With DVD-R discs, deleting a title
will not increase the disc space.
• Deleting a title in the Playlist will not increase the capacity, try deleting a
title in the Original.
• Some DVD players do not play back the disc made on other recorder.
Refer to the manual of the unit.
• Video mode discs made on other recorder cannot be dubbed using this
unit.
• When the number of the titles or the chapters exceeds the maximum
recordable number, the dubbing will not be executed.
• Copy-once programmes or the copy protected programmes may not be
dubbed depending on the recording media.
Regarding the limitations on dubbing, refer to the page 37.
Solution
• No batteries in the remote or the batteries may be weak.
Replace the batteries.
• Make sure there is no obstacle between the remote and the unit.
• Try getting closer to the unit. (See page 12.)
• Make sure to press the Device Select Buttons ([HDD] or [DVD]) before
operating on the device of your choice.
• If above solutions do not solve the problem, please call an Authorized
Service Centre.
• While the disc is loading, [SETUP] does not respond.
Solution
• Check that the AC power cord is connected securely.
• (In case of power failure) Check the breaker and Clock Setting.
• Please cancel the password and the set level. (See page 79.)
87
EN