FUNAI HD-B2735 Owner's Manual page 34

E2B21BD_E2B28BD_EN.book Page 34 Monday, August 21, 2006 5:05 PM
3 Recording Date:
When press [Cursor
setting will change as follows.
e.g., 1st January
01/01
Daily
M-F
W-Sat
W-Fri
W-Sun
31/01
Skip:
Select this item only when you want to deactivate
the periodical (Daily, Mon-Fri or Weekly) timer
recording temporarily. To do so, move the cursor
to the Skip section and then press
/
[Cursor ].
Check mark will appear and press [ENTER] to
activate the setting.
4 Start Time:
5 End Time:
6 Rec Mode:
Refer to "Rec Mode" on page 26.
7 Recording Media (HDD or DVD):
To record onto the HDD, select "HDD". To record
onto a disc, select "DVD".
8 PDC system:
Refer to "PDC (Programme Delivery Control)" on
page 35.
• PDC system is only available for HDD.
• PDC system is not available for periodical timer
programme.
3
Select an item to set using
[Cursor ], and set the contents to
/
suit your preference using
[Cursor
/
• Press [CLEAR] will reset all the entered
information.
4
Press [ENTER] when all the
information is entered.
The icon will appear on the Front Panel
Display indicating one or more Timer Recordings
are in standby.
• To set another programme, repeat steps 2 to 4.
• When programmes are overlapped, a warning
message "All or part of the programme will not
be recorded." will appear.
- When icon appears, a part of the programme
will not be recorded.
- When icon appears, the whole programme
will be recorded.
For details on overlapped Timer Programmings,
refer to "Hints for Timer Recording" on page 35.
5
Press [TIMER PROG.] to exit.
• You can also press [SETUP] twice to exit.
EN
] at the current date, the
Weekly recording
].
• If you press [STANDBY-ON] to turn the unit to
standby mode, it will turn on 2 minutes before
the programmed recording time, and start
recording at the programmed recording time.
When the recording is completed, the unit will
ask you whether to turn off the unit.
The unit will be turned off automatically if you
select "Yes" or if you do not reply in 1 minute.
• To stop recording in progress, press [STOP S].
Confirmation message will appear. Select "Yes"
/
using [Cursor ].
Relay Recording:
When you Timer Record to DVD, the unit
automatically changes the recording media to
HDD under the conditions listed below:
- when there is no recordable disc in the unit.
- when the disc does not have enough space for
the recording.
- if the unit is formatting or finalising a disc.
This feature is available only for Timer Recording
but not for OTR.
Note
• If you have not set the clock, the clock setting
window will appear instead of Timer Programme List
at step 1. Continue from step 3 in "Setting the clock"
on page 21 before programming the timer.
• The maximum recordable duration is 7 hours for
Video mode discs and 8.5 hours for VR mode discs.
• If the recording time exceeds 12 hours, a Timer
Recording cannot be set.
• If the starting time you entered is already in the past,
the recording will start as soon as you activate the
Timer Recording by pressing [ENTER] at step 4.
• If playback and recording are in progress at the
same time, select the appropriate device by
pressing [HDD] or [DVD] before you press
[PAUSE p] or [STOP S] to pause or stop the
operation.
• When the Timer recording is finished, confirmation
message will appear. If there is no signal for about
1 minute, unit will turn off automatically.
Editing the Timer Programming
information
1
Press [TIMER PROG.].
Timer Programme List will appear.
Timer Programme
Station ---
HDD Remain 72:00(SP) HDD Remain 72h00m(SP)
Date
Skip CH Start
P02 06 (Mon) 22 : 00
--- -- (---) -- : --
-- (---)
--- -- : --
--- -- (---) -- : --
-- (---)
--- -- : --
-- (---)
--- -- : --
--- -- (---) -- : --
-- (---)
--- -- : --
To change the setting of a programme:
1 Select the programme you want to edit using
/
[Cursor ], then press [ENTER].
• Use [SKIP F] or [SKIP B] to jump to next /
previous Timer Programme List page.
34
10/04/06(Mon) 19:34
Page 1/4 Page 1/4
End Mode PDC
23 : 00 SP HDD Off
-- : -- SP HDD ---
-- : -- SP HDD ---
-- : -- SP HDD ---
-- : -- SP HDD ---
-- : -- SP HDD ---
-- : -- SP HDD ---
-- : -- SP HDD ---