Advertisement
8. Belt Tension Plate Assembly (Including ribbon driving gear)
8-1 Disassembly
(1) Remove carriage guide shaft A.
1) Remove E ring on frame LB.
2) Remove the nuts on carriage shaft
A.
(4N x 2)
3) Move
the
carriage to frame LB side and pull carriage shaft A out to the right.
Frame LB
Carriage shaft A
94VF303001010
Frame RB
(2) Move the carriage to the center between frame LB and R B.
{3) Remove the home position sensor assembly. (2. 5mm screw, E ring)
·There
is
no need to remove the soldered lead wire.
t'<;f
{4) Remove the lock screw for the belt tension assembly and remove the timing belt. {2.5mm screw)
{5) Pull out the beh tension plate assembly and ribbon driving gear.
-
31-
Advertisement
