Advertisement
(5) Remove the paper feeding motor assembly. (2.5mm screw x 2)
• When removing it, only take out the two screws shown in the figure so that the motor heat sinker and
HP sensor board assembly come out together.
(6) Remove the timing belt motor assembly. (2.5mm screw x 2)
Motor heat sinker
94 V F 3030260 1 0
Paper feeding motor assembly
94 V F303031 000
(7) Remove the timing belt motor assembly from
the
motor heat sinker.
(8) Remove the PTS sensor board assembly.
(9) Remove the belt driving pulley ( E ring).
·When removing the belt driving pul.ley; frrst loosen the timing belt. (Refer
to
page 29)
(10) Remove the ball bearing from the belt driving pulley.
PTS sensor board
94 V F 304059000
Timing belt motor
assembly
94VF303027000
Motor heat sinker
94VF30302601 0
-28-
Belt driving pulley
94VF303017000
Advertisement
