Stand Mode Operation - Datalogic Gryphon GD44XX Quick Reference Manual

Stand Mode Operation

Stand Mode:
configurable amount of time after a good read occurs. The
scanner exits stand mode when movement is detected. If the
trigger is activated from stand mode, the scanner transitions
into one of the triggered modes.
♦
Stand Mode = Disabled
Stand Mode = for All-in-one and Base
20
In Stand Mode, the illumination remains on for a
This feature is available starting with firmware
release 610001013.
ENTER/EXIT PROGRAMMING MODE
Stand Mode = Generic Stand
Stand Mode = Precise Stand
Operating Modes
Gryphon™ I GD44XX