Stand Mode Operation - Datalogic Gryphon GD44XX Quick Reference Manual

Stand Mode Operation

In Stand Mode, the illumination remains on for a
Stand Mode:
configurable amount of time after a good read occurs. The
scanner exits stand mode when movement is detected. If the
trigger is activated from stand mode, the scanner transitions
into one of the triggered modes.
This feature is available starting with firmware
release 610001013.
ENTER/EXIT PROGRAMMING MODE
♦
Stand Mode = Disabled
Stand Mode = for All-in-one and Base
20
Operating Modes
Stand Mode = Generic Stand
Stand Mode = Precise Stand
Gryphon™ I GD44XX