VTech VM305 User Manual

What's in the box
User's manual
VM305
Accessory baby unit
for use with VTech model
VM343
BC
Connect the baby unit
Congratulations
NOTES
on purchasing your new VTech product. Before • Use only the power adapter supplied with this
product.
using this product, please read Important
• Make sure the electrical outlet is not controlled by
safety instructions.
wall switch.
This manual has instructions on how to set
• The power adapter is intended to be correctly
oriented in a vertical or floor mount position. The
up and pair your new baby unit. For complete
prongs are not designed to hold the plug in place if
instructions on using the baby unit, see the
they are plugged into a ceiling, under-the-table or
user's manual that comes with your video and
cabinet outlet.
audio monitor.
• Make sure the baby unit and the power adapter
cord are out of reach of children.
For support, shopping, and everything new at
VTech, visit our website at
www.vtechphones.com.
Register online to get an additional
3-month warranty!
Visit www.vtechphones.com.
Registration
Register your product online for
enhanced warranty support.
Product news
Learn about the latest VTech
products.
Overview Before use
f Pair extra new baby unit
Each newly purchased baby unit (VM305)
a must be paired to your video and audio monitor
g system (VM343).
b
NOTES
c h
• You can pair a maximum of four baby units to your
parent unit. Each new baby unit must be paired to
i the parent unit before use.
d
• Make sure you power on the parent unit before
e
pairing.
j
To pair a baby unit:
k
1. Press MENU when the parent unit is not in
use.
2. Press or to choose PAIR/UNPAIR
l
CAM, then press SELECT to select.
m 3. Press or to choose Pair CAM, then
press SELECT to select.
4. Press or to choose an empty baby unit
slot, then press SELECT. The parent unit
screen displays Press and hold the pair
Light sensor
1
button at the CAM for 5 seconds until the
power indicator flashes..
Infrared LEDs
2
5. Immediately press and hold PAIR on the
3 Camera
bottom of the baby unit. The LED light
flashes quickly.
4 Microphone
When pairing is successful, the screen displays
5 Speaker
the view of newly paired baby unit in
SINGLE-CAM mode. The LED light on the new
6 Antenna
baby unit remains on.
7 Power jack
NOTES
8 Temperature sensor
• If pairing fails, the screen displays Pairing failed.
Try the pairing process again.
9 ON/OFF LED light
• Only one baby unit can be paired at a time.
• On when the baby unit is turned on.
• Flashes when the baby unit is pairing to
To unpair a baby unit:
the parent unit.
NOTE
10 ON/OFF switch
Make sure you power on the baby unit and the parent
• Slide to turn on or off the baby unit.
unit before unpairing the baby unit.
1. On the idle parent unit, press MENU.
11 -/VOL/+
2. Press or to choose PAIR/UNPAIR
• Press to adjust the listening volume.
CAM, then press SELECT to select.
12 PAIR
3. Press or to choose Unpair CAM, then
• Press and hold to pair to the parent unit
press SELECT to select.
when an empty baby unit slot is chosen
4. Press or to choose a desired baby unit,
at the parent unit.
then press SELECT.
13 Threaded socket
• For wall mount installation use.
Operating range
5. Press on the parent unit when the screen
displays To unpair CAM X, press the
The operating range of the baby monitor is up to
[ZOOM] key at the Parent Unit..
6. Press SELECT when the screen displays
300 meters (1,000 feet) outdoors or 50 meters
Then, press the [MENU/SELECT] key to
(160 feet) indoors. The actual operating range
confirm..
may vary depending on the environmental
7. When unpairing is successful, the screen
conditions and other interferences such as
displays CAM X is unpaired and returns to
walls, doors and other obstructions.
previous menu. If there is no paired baby
unit, the screen displays No CAM is paired..
The LED light on the selected baby unit
General product care
flashes slowly.
Positioning the baby monitor
To keep this product working well and looking good,
follow these guidelines:
NOTE
• Avoid putting it near heating appliances and devices
This baby monitor is intended as an aid. It is not a
that generate electrical noise (for example, motors
substitute for proper adult supervision, and should not
or fluorescent lamps).
be used as such.
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
CAUTION
• Clean with a soft cloth.
Keep the baby unit out of the reach of the baby. Never
• DO NOT immerse the baby unit in water and do not
place or mount the baby unit inside the baby's crib or
clean them under the tap.
playpen.
• DO NOT use cleaning spray or liquid cleaners.
1. Place the baby unit at least 1 meter / 3 feet • Make sure the baby unit is dry before you connect
away from your baby. them to the mains again.
Important safety instructions
When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and injury, including the following:
1. Follow all warnings and instructions marked on
the product.
2. Adult setup is required.
3. This product is intended as an aid. It is not
2. Place parent unit at least 1 meter / 3 feet
a substitute for responsible and proper adult
away from the baby unit.
supervision and should not be used as such.
4. This product is not intended for use as a medical
monitor.
At least 1 meter
5. Do not use this product near water. For example,
(3 feet)
do not use it next to a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in a
wet basement or shower.
6. Use only the adapters included with this product.
Incorrect adapter polarity or voltage can seriously
NOTE damage the product.
Baby unit power adapter:
If you experience audio feedback on either the parent
Input 100-240V AC 50/60 Hz; output: 6V DC 1A
unit or baby unit, move the parent unit further away
For pluggable equipment, the socket-outlet shall
until there is no more audio feedback; or press -/VOL
be installed near the equipment and shall be
on the parent unit to lower the audio feedback sound.
easily accessible.
TIP 7. The power adapters are intended to be correctly
oriented in a vertical or floor mount position. The
For desktop usage and/or wall mounting the baby
prongs are not designed to hold the plug in place
unit, you can refer to Quick Start Guide.
if it is plugged into a ceiling, under-the-table or
cabinet outlet.
8. Unplug this product from the wall outlet before Cautions
cleaning. Do not use liquid or aerosol cleaners.
1. Use and store the product at a temperature
Use a damp cloth for cleaning.
between 32 o F and 104 o F.
9. Do not cut off the power adapters to replace them with
2. Do not expose the product to extreme cold,
other plugs, as this causes a hazardous situation.
heat or direct sunlight. Do not put the product
10. Do not allow anything to rest on the power cords.
close to a heating source.
Do not install this product where the cords may be
3. Make sure the baby unit(s) and the adapter
walked on or crimped.
cord(s) are always out of reach of the baby,
11. This product should be operated only from the
at least 3 feet away from the baby or crib, to
type of power source indicated on the marking
avoid a possible strangulation hazard.
label. If you are not sure of the type of power
4. Never place the baby unit(s) inside the baby's
supply in your home, consult your dealer or local
crib or playpen. Never cover the baby unit(s)
power company.
with anything such as a towel or a blanket.
12. Do not overload wall outlets or use an extension
5. Other electronic products may cause
cord.
interference with your baby monitor. Try
13. Do not place this product on an unstable table,
installing your baby monitor as far away from
shelf, stand or other unstable surfaces.
these electronic devices as possible: wireless
14. This product should not be placed in any area
routers, radios, cellular telephones, intercoms,
where proper ventilation is not provided. Slots and
room monitors, televisions, personal
openings in the back or bottom of this product
computers, kitchen appliances and cordless
are provided for ventilation. To protect them from
telephones.
overheating, these openings must not be blocked
by placing the product on a soft surface such as
Precautions for users of implanted cardiac
a bed, sofa or rug. This product should never be
pacemakers
placed near or over a radiator or heat register.
Cardiac pacemakers (applies only to digital cordless
15. Never push objects of any kind into this product
devices):
through the slots because they may touch
Wireless Technology Research, LLC (WTR), an
dangerous voltage points or create a short circuit.
independent research entity, led a multidisciplinary
Never spill liquid of any kind on the product.
evaluation of the interference between portable
16. To reduce the risk of electric shock, do not
wireless devices and implanted cardiac pacemakers.
disassemble this product, but take it to an
Supported by the U.S. Food and Drug Administration,
authorized service facility. Opening or removing
WTR recommends to physicians that:
parts of the product other than specified access
doors may expose you to dangerous voltages or
Pacemaker patients
other risks. Incorrect reassembling can cause electric
• Should keep wireless devices at least six inches
shock when the product is subsequently used.
from the pacemaker.
17. You should test the sound reception every
• Should NOT place wireless devices directly over
time you turn on the units or move one of the
the pacemaker, such as in a breast pocket, when it
components.
is turned ON.
18. Periodically examine all components for damage.
WTR's evaluation did not identify any risk to
19. Be aware of possible loss of privacy while using
bystanders with pacemakers from other persons
public airwaves. Conversations may be picked
using wireless devices.
up by other nursery monitors, cordless phones,
scanners, etc.
Electromagnetic fields (EMF)
20. Children should be supervised to ensure that they
This VTech product complies with all standards
do not play with the product.
regarding electromagnetic fields (EMF). If handled
21. The product is not intended for use by persons
properly and according to the instructions in this
(including children) with reduced physical, sensory
user's manual, the product is safe to be used based
or mental capabilities, or lack of experience
on scientific evidence available today.
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS