Service Management Tasks
Soft IOM Reset
The soft IOM reset procedure is applicable during the ISSU process and for a manual soft reset
procedure. The impact to the data plane forwarding during the reboot process is minimized to ten
(10) seconds or less. When the control plane is rebooted, time sensitive tasks currently running on
the IOM need to be redirected to the CPM. The command to perform a soft IOM reset is "clear
card card-number soft". During the process, related show commands such as "show card" and
"show mda" will indicate a soft IOM reset is occurring.
Page 158
7750 SR OS Interface Configuration Guide